Operation Manual

60
PIP/PBP
• PIP/PBP Enable: Toggle between displaying two sources at once (Main and
PIP/PBP images) or one source only.
• Main Source: From the list of active inputs, select one to be used as the main
image.
• Sub Source: From the list of active inputs, select one to be used as the PIP/
PBP.
• Swap: Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
• Size: Select the PIP/PBP size. Available options: Small, Medium, or Large.
• Layout: Set the location of the PIP/PBP image on the screen.
NOTE:

PIP/PBP layout and size table as described below.

P : indicates primary source region (lighter color).

* : Both source regions are the same size. Main and sub picture are the same size when the PBP size is large.
PIP/PBP Layout
PIP/PBP Size
Small Medium Large
PBP, Main Left
P
P
P
*
PBP, Main Top
P
P
P
*
PBP, Main Right
P
P
P
*
PBP, Main Bottom
P
P
P
*
PIP-Bottom Right
P
P
P
PIP-Bottom Left
P
P
P
PIP-Top Left
P
P
P
PIP-Top Right
P
P
P