Operation Manual

68
The image is stretched when displaying 16:9 DVD title
` When you play anamorphic DVD or 16:9 DVD, the projector will show the
best image when the projector display mode is set to Auto in the OSD.
` If you play 4:3 format DVD titles, please change the format to 4:3 in the
projector OSD.
` If the image is still stretched, you will also need to adjust the aspect ratio by
referring to the following:
` Please setup the display format as 16:9 (wide) aspect ratio type on your
DVD player.
Image is too small or too large
`
Move the projector closer to or further from the screen.
`
Press “Menu” on the control panel. Go to “OUTPUT” --> “Aspect”and try the
different settings.
Image has slanted sides:
`
If possible, reposition the projector so that it is centered on the screen and
below the bottom of the screen.
`
Press the "Keystone" button on the remote control, until the sides are
vertical.
Image is reversed
`
Adjust the “SETUP" --> "Rear Projection” to correct it.