Operation Manual

English
59
English
LAN Control
Input Select
Select an input source from the drop down list.
Adjusting the Settings
Image
[Brightness] Adjust brightness by clicking [+] or [-]. Click [
Reset
]
to return the default value 0.
(See p.39 on the Projector User's manual)
[Contrast] Adjust contrast by clicking [+] or [-]. Click [
Reset
]
to return the default value 0.
[Sharpness] Adjust sharpness by clicking [+] or [-]. Click [
Reset
]
to return the default value 0.
[Picture mode] Select a picture mode from the drop down list.
Audio
[Volume] Adjust volume by clicking [+] or [-]. Click [
Reset
]
to return the default value 5
Management
[Power off on No
signal]
Select power off timer value after no signal is
detected from the drop down list.
[Lamp Power] Select lamp power from the drop down list.
[Aspect] Select aspect ratio from the drop down list.