Operation Manual

64
English
LAN Control
Since no error will be reported even if any error is occurred in
sending a test mail.
Check if the test mail is arrived to destination mail box.
The body of the mail is "Email Test:xxx.xxx.xxx.xxx"
* "xxx.xxx.xxx.xxx" means IP address of the projector. (ex.
192.168.0.100)
Logout
Click Logout tab to logout from this projector control web site.
This page will appear for 2 seconds and then jump to login page.
Be sure Email
settings and SMTP
settings are correct.
Email test is
recommended after
alert setting is set.
Always set “Control
method” to “LAN”
in OSD menu in the
projector to detect
the error.
Default value of
Email setting is a
sample setting as
followings.
[To] [e-mail]
[Cc] [e-mail]
[Subject] Project alert
[From] [e-mail]
Only SMTP protocol
is supported.
N
o
t
e