User's Manual
Table Of Contents
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning from a Computer
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Smart Organizing Monitor
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
FiO
Printer Features Settings
I/O Timeout
Timeout: USB
Specifies how many seconds the machine waits for print data and if the data is interrupted
while being sent from the computer via USB. If the machine does not receive any data within
the specified time, the machine only prints the data it has received.
Default: [60 sec.]
• Off
• 15 sec.
• 60 sec.
• 300 sec.
Auto Continue
Sets the machine to ignore errors on paper size or type and continue printing. The printing stops
temporarily if an error is detected, and resumes automatically after the specified time depending on
the settings specified in the control panel. If [Auto Continue] is set to [0 sec.], no error message
appears.
Default: [0 sec.]
• Off
• 0 sec.
• 10 sec.
• 30 sec.
Sub Paper Size
Sets the machine to print onto paper of another size if the specified paper is not loaded in tray.
Alternative sizes are preset to A4 and Letter.
Default: [On]
• On
• Off
Printer Features Settings
meihua-p2_mf2_com_user_guide_00106435_eng.xml 125
Draft 2013/03/26