User's Manual

Error and Status Messages Appear on the
Smart Organizing Monitor
Message Causes Solutions
Printer Power Off
(Communication
Error)
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
Out of Paper /
Misfeed
Paper is not loaded in the
machine's input tray, or paper
jam has occurred.
If paper is not loaded, load paper in the
input tray. For details about loading
paper, see page 36 "Loading Paper".
If paper is jammed inside the machine,
remove the jammed paper. For details
about removing jammed paper, see
page 144 "Paper Feed Problems".
Paper Size Mismatch The paper size specified on the
machine and the size specified
in the printer driver do not
match.
For details about specifying the paper size
setting on the machine, see page 36
"Loading Paper". For details about
changing the paper size setting in the
printer driver, see the printer driver Help.
Tio,P
If [Auto Continue:] is set to [0 sec],
no error message appears.
Paper Type
Mismatch
The paper type specified on the
machine and the type specified
in the printer driver do not
match.
For details about changing the paper type
setting of the machine, see page 36
"Loading Paper". For details about
changing the paper type setting in the
printer driver, see the printer driver Help.
Tio,P
If [Auto Continue:] is set to [0 sec],
no error message appears.
TiO,P
Toner Almost
Empty
TiO,P
Toner Almost Empty
TiO,P
Prepare a new print cartridge.
TiO,P
Out of Toner
TiO,P
Out of Toner
TiO,P
Replace the print cartridge. See
page 137 "Replacing the Print Cartridge".
10. Troubleshooting
164 meihua-p2_mf2_com_user_guide_00106455_eng.xml
Draft 2013/03/26