User's Manual
Table Of Contents
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning from a Computer
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Smart Organizing Monitor
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
Placing Originals on the Exposure Glass
• Do not place originals until all correction fluid or toner becomes completely dry. Doing so may
create marks on the exposure glass that will appear on copies.
1. Lift the exposure glass cover.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
CXP047
3. Lower the exposure glass cover.
Scanning thick originals
1. Lift the exposure glass cover.
2. Pull up the exposure glass cover and remove it.
CXP009
3. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
4. Lower the exposure glass cover.
2. Loading Paper
44 meihua-p2_mf2_com_user_guide_00106404_eng.xml
Draft 2013/03/26