User's Manual
Table Of Contents
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning from a Computer
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Smart Organizing Monitor
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
• If there is a paper jam in the ADF, open the ADF cover, and then remove the jammed paper.
Specify the copy setting again from the page where the paper jammed.
• If the paper runs out, replenish it, and then press the [Start] key to resume printing.
Canceling a Copy
If copying is canceled while scanning an original placed on the exposure glass, copying is canceled
immediately and there is no printout. If copying is canceled while scanning a multiple-page original
placed in the ADF, scanning stops halfway at the current page.
1. Make sure that the copier mode screen is displayed.
CXP104
2. Press the [Clear/Stop] key.
CXP102
3. Press the [1] key.
To cancel printing, press the [1] key (1: Yes). To continue printing, press the [2] key (2: No).
Basic Operation
meihua-p2_mf2_com_user_guide_00106410_eng.xml 57
Draft 2013/03/26