User's Manual
Table Of Contents
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning from a Computer
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Smart Organizing Monitor
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
CXP104
2. Place the original on the exposure glass or in the ADF.
3. Press the [Speed Dial] key.
CXP106
4. Enter the Speed Dial number using the number keys, and then press the [OK] key.
5. Press the [Start] key.
CXP103
When you place original on the exposure glass and Memory Transmission mode is enabled,
perform the following steps to scan the subsequent pages of the original.
6. If you have more originals to scan, press the [1] key within 60 seconds, place the next
original on the exposure glass, and then press the [OK] key. Repeat this step until all
originals are scanned.
7. When all originals have been scanned, press the [2] key to start sending the fax.
Sending a Fax
meihua-p2_mf2_com_user_guide_00106424_eng.xml 91
Draft 2013/03/26