User's Manual
Table Of Contents
- TABLE OF CONTENTS
- How to Read This Manual
- Model-Specific Information
- Important Safety Instructions
- Important Safety Instructions
- ENERGY STAR Program
- 1. Guide to the Machine
- 2. Loading Paper
- 3. Printing Documents
- 4. Copying Originals
- 5. Scanning from a Computer
- 6. Sending and Receiving a Fax
- Fax Mode Screen
- Setting the Date and Time
- Entering Characters
- Registering Fax Destinations
- Sending a Fax
- Using the Fax Function from a Computer (PC FAX)
- Receiving a Fax
- Lists/Reports Related to Fax
- 7. Configuring the Machine Using the Control Panel
- 8. Configuring the Machine Using Smart Organizing Monitor
- 9. Maintaining the Machine
- 10. Troubleshooting
- 11. Appendix
- INDEX
3. Specify the destination using the external telephone.
4. When the other party answers, ask them to press their fax start button.
5. Press the [Start] key.
CXP103
If [Fax Mode] is set to [Easy Mode], proceed to Step 7.
6. If the original is placed on the exposure glass, press the [1] key (1: TX).
7. Replace the handset.
Specifying the Scan Settings
Adjusting image density
There are five image density levels. The darker the density level, the darker the printout.
1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
CXP104
2. Press the [ ] or [ ] key in the standby mode screen to select [Density], and then press the
[OK] key.
6. Sending and Receiving a Fax
96 meihua-p2_mf2_com_user_guide_00106424_eng.xml
Draft 2013/03/26