User's Manual

12
Handling the Machine's Interior
WARNING:
Do not remove any covers or screws other than those explicitly men-
tioned in this manual. Inside this machine are high voltage compo-
nents that are an electric shock hazard and laser components that
could cause blindness. Contact your sales or service representative
if any of the machine's internal components require maintenance,
adjustment, or repair.
Do not attempt to disassemble or modify this machine. Doing so risks
burns and electric shock. Note again that exposure to the laser com-
ponents inside this machine risks blindness.
•
•
CAUTION:
Some of this machine's internal components get very hot. For this reason,
take care when removing misfed paper. Not doing so could result in burns.
•
When removing jammed paper, make sure not to trap or injure your fingers.
•
When loading paper, take care not to trap or injure your fingers.•
Handling the Machine's Supplies
WARNING:
Do not use the cleaner to suck spilled toner (including used toner).
Sucked toner may cause firing or explosion due to electrical contact
flickering inside the cleaner. However, it is possible to use the cleaner
designed for dust explosion-proof purpose. If toner is spilled over the
floor, sweep up spilled powder toner slowly and clean remainder with
wet cloth.
•
Do not incinerate toner (new or used) or toner containers. Doing so
risks burns. Toner will ignite on contact with naked flame.
•
Do not store toner (new or used) or toner containers anywhere near
naked flames. Doing so risks fire and burns. Toner will ignite on con-
tact with naked flame.
•
R
R
R