User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Swtchg btwn 1&2 Sided Prnt
You can specify which side of the paper to print on when the PS command is used to perform
duplex printing and the "setpagedevice" command is entered.
Default: [Active]
• Active
Cancels duplex printing, and prints pages after the "setpagedevice" command has been
entered on the front side of paper.
• Inactive
Retains duplex printing, and prints pages after the "setpagedevice" command has been
entered on the back side of paper.
Data Format
You can select the data format from Binary Data or TBCP.
This setting is ineffective if a parallel or EtherTalk connection is used.
When binary data is sent from the printer driver when the printer is working with a parallel or USB
connection, the print job is canceled.
Default: [TBCP]
• Binary Data
• TBCP
When an Ethernet connection is used, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using the control panel is
Binary Data.
• The printer driver data format is binary and the data format selected using the control panel is
TBCP.
Resolution
You can specify the resolution.
Default: [600dpi Fast]
• 600dpi Fast
• 600dpi Std.
• 1200dpi
Toner Saving
You can specify whether or not to reduce toner consumption when printing. When this setting is
enabled, print quality may be degraded.
Default: [Off]
• On
• Off
5. Configuring and Managing the Printer
250 midas-p3_com_operating_instructions_gb_00208890_eng.xml
Draft 2016/01/18