User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
• Call Service
• Out of Toner
• Toner Almost Empty
• Paper Misfeed
• Cover Open
• Out of Paper
• Paper Tray Error
• Output Tray Full
• Unit Connection Error
• Waste Toner Bottle is Full
• Waste Toner Bottle is Almost Full
• File Storage Memory Full Soon
• Device Access Violation
• Replacement Required: Unit
• Replacement Required Soon: Unit
• Toner Almost Empty (Remaining Level Selectable)
1. Log in to Web Image Monitor in administrator mode.
For details, see page 333 "Displaying the top page".
2. Click [Configuration] on the [Device Management] menu.
3. Under "Device Settings", click [Email].
4. Configure the following settings:
• Administrator Email Address: Specify the administrator's e-mail address.
• Items in the Reception column: Make the necessary settings for sending and receiving e-mails.
• Items in the SMTP column: Configure the SMTP server. Check your mailing environment, and
then specify the necessary items. You can also perform mail authentication for the SMTP
server.
• Items in the POP before SMTP column: Configure the POP server. Check your mailing
environment, and then specify the necessary items. You can also perform mail authentication
for the POP server.
• Items in the POP3/IMAP4 column: Configure the POP3 or IMAP4 server. Check your mailing
environment, and then specify the necessary items.
• Items in the Email Communication Port column: Configure the port to be used for access to the
mail server.
• Items in the Email Notification Account column: Specify these items If you want to use e-mail
notification.
5. Configuring and Managing the Printer
344 midas-p3_com_operating_instructions_gb_00198701_eng.xml
Draft 2016/01/18