User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
• Functional Problem: Plotter
• Error: Trays 1–2
• Error: Address Book Data
• SD Card Authentication Failure
• Error: HDD Board
• Error: Ethernet Board
• Error: Parallel Interface
• Error: Wireless LAN Card
• Error: USB
• Error: Printer
When the error is cleared, the printer sends an e-mail with the following subject:
"Device Recovery Report: XXXXX (description of the error that has been cleared)"
On-demand e-mail notification
1. Log in to Web Image Monitor in administrator mode.
For details, see page 333 "Displaying the top page".
2. Click [Configuration] on the [Device Management] menu.
3. Under "Device Settings", click [On-demand Email Notification].
The dialog box for configuring notification settings appears.
4. Make the following settings:
• Notification Subject: Enter a text string to be added to the subject line of return e-mails.
• Notification Message: You can set this according to your needs, for example, the printer's
location and service representative contact information.
• Restriction to Device Status Info.: Specify whether or not to allow access to information such as
the printer settings and status.
• Items in the Receivable Email Address/Domain Name Settings column: Enter an e-mail
address or domain name to use for requesting information by e-mail and to receive a return e-
mail.
5. Click [OK].
6. Click [Logout].
7. Quit Web Image Monitor.
• For details about the settings, see Web Image Monitor Help.
5. Configuring and Managing the Printer
348 midas-p3_com_operating_instructions_gb_00198701_eng.xml
Draft 2016/01/18