User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
For example, if the search target is the sales department of ABC company, enter "dc=sales
department, o=ABC". (In this example, the description is for an active directory. "dc" is for the
organization unit, and "o" is for the company.)
Registering a search base may be required depending on your server environment. If it is required,
unspecified searches will result in an error.
Check your server environment and enter any required specifications.
6. Specify a port number for communicating with the LDAP server.
[Port Number] Enter the port number [OK]
7. Specify whether or not to use SSL when communicating with the LDAP server.
[Use Secure Connection (SSL)] [On] or [Off] [OK]
To use SSL, the LDAP server must support SSL.
If you set SSL to [On], the port number automatically changes to "636".
If you do not enable SSL, security problems may occur. To enable SSL, you must use the printer's
settings. For details, see Security Guide.
8. Select the authentication method for the LDAP server.
• If you do not want to use an authentication method:
[Authentication] [Off]
• If you want to use an authentication method:
[Authentication] [On] [Authentication] [Kerberos Authentication], [Digest
Authentication], or [Cleartext Authentication] [OK] Specify the authentication
information, such as user name and password, as necessary
The authentication settings must match your server's authentication settings. Check your server
settings before configuring this printer.
The administrator account can be used for authentication when you send a search request to the
LDAP server. Do not enter the administrator account name and password when using
authentication for each individual or search.
• [Kerberos Authentication]
An encrypted password is sent to the KDC server where authentication is performed.
• [Digest Authentication]
An encrypted password is sent to the LDAP server.
Digest Authentication is available with LDAP version 3.0 only.
• [Cleartext Authentication]
5. Configuring and Managing the Printer
366 midas-p3_com_operating_instructions_gb_00198743_eng.xml
Draft 2016/01/18