User's Manual

Message Cause Solution
"Installing the Interface
Units".
• If the message appears
again, contact your service
representative.
"Load ppr blw in (Tray
name)."
The printer driver settings are
incorrect or the tray does not
contain paper of the size selected
in the printer driver.
Check that the printer driver
settings are correct, and then load
paper of the size selected in the
printer driver into the input tray.
For details about how to change
the paper size, see page 105
"Loading Paper".
"No toner. Replace Toner
Cartridge."
The toner has run out. Replace the
print cartridge.
For details, see page 449
"Replacing the Print Cartridge".
"No color toner. Color toner
is required to print in black
& white with the current
paper type. Replace the
color Print Cartridge or
press [Job Reset] to cancel
printing."
The color toner has run out.
Replace the print cartridge.
For details, see page 449
"Replacing the Print Cartridge".
"n ppr siz msmtch Select
new tray or use ppr size
below."
("n" is a tray name.)
The size of the paper in the tray
does not match the paper size
specified in the printer driver.
Select a tray containing paper
that is the same size as the
specified paper size.
"Problem: Printer Font Error" An error has occurred in the font
settings.
Contact your service
representative.
"Problems with the wireless
board. Please call service."
(A "wireless LAN interface
board" is referred to as a
"wireless board".)
The printer has detected a
wireless LAN interface board
failure.
If the message appears again,
contact your service
representative.
"Output Tray is full. Remove
paper."
The output tray is full. Remove the paper.
When Messages Are Displayed
midas-p3_com_operating_instructions_gb_00198757_eng.xml 385
Draft 2016/01/18