User's Manual

Message Cause Solution
Specified Paper Size and
Type".
"Waste Toner Bottle is full.
Replace the bottle."
The waste toner bottle is full. Replace the waste toner bottle.
For details, see page 451
"Replacing Other Consumables".
Messages during Direct print from a memory storage device
Message Causes Solutions
"Unable to access the
specified memory storage
device."
The memory device used cannot
be recognized.
For details about the
recommended memory devices
for the Direct printing function
from memory storage devices,
contact your service
representative. The USB flash
memory device that features
password protection or other
security features may not work
normally.
Alert Messages (Printed on Error Logs and Reports)
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
Message Cause Solution
"Address book is in use." The printer currently cannot
perform authentication because
the Address Book is being used
by another function.
Wait a while, and then retry the
operation.
"Auto-user prog. failed." Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because the
Address Book is full.
For details about the automatic
registration of user information,
see Security Guide.
When Messages Are Displayed
midas-p3_com_operating_instructions_gb_00198757_eng.xml 387
Draft 2016/01/18