User's Manual

Message Cause Solution
"Cannot print." You have no privileges to print the
PDF file you want to print.
Contact the owner of the
document.
"Classification Code Error" The classification code is not
specified with the printer driver.
Select [Optional] for the
classification code. For details
about how to specify classification
code settings, see page 149
"Registering Classification
Codes".
"Collate cancelled." Collate was canceled. Turn the printer off, and then turn it
on again. If the message appears
again, contact your service
representative.
"Collate: Page max." The amount of free memory is
insufficient to perform collating.
Reduce the number of pages to
be printed.
"Command Error." An RPCS command error
occurred.
Check that the communication
between a device and the printer
is working correctly.
"Compressed Data Error" The printer detected corrupt
compressed data.
Check that the program you used
to compress the data is
functioning correctly.
"Duplex cancelled." Duplex printing was canceled. Change the setting for "Duplex
Tray" in [Paper Input] to enable
duplex printing for the paper tray.
"Error occured. Prntd/
Cncld."
An error occurred during printing,
but it was ignored.
Check the print settings.
"Excd Prt Vol Use max
count."
Printing was canceled because
the print maximum number was
reached.
Contact your user administrator.
"Excd Prt Vol Use max
count."
Maximum number of user codes
that can be registered has been
reached.
Delete unnecessary user codes.
"File System Error." PDF direct printing could not be
performed because the file system
could not be obtained.
Turn the printer off, and then turn it
on again. If the message appears
6. Troubleshooting
388 midas-p3_com_operating_instructions_gb_00198757_eng.xml
Draft 2016/01/18