User's Manual

Message Cause Solution
"You do not have a
privilege to use this function.
This job has been
cancelled."
The entered Login User Name or
Login Password is not correct.
Check that the Login User Name
and Login Password are correct.
"You do not have a
privilege to use this function.
This job has been
cancelled."
The logged in user is not allowed
to use the selected function.
For details about how to set
permissions, see Security Guide.
"You have no privilege to
use this func. Operation
canceld."
The logged in user does not have
the privileges to register programs
or change the paper tray settings.
For details about how to set
permissions, see Security Guide.
Messages during Direct print from a memory storage device
Message Causes Solutions
"99: Error" This data cannot be printed. The
specified data is either corrupt or
not supported by the Direct
printing function from memory
storage devices.
Check that the data is valid. For
details about the kinds of data
supported by the Direct printing
function from memory storage
devices, see page 191 "Direct
Printing from a Memory Storage
Device".
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see page 100
"Test Printing".
6. Troubleshooting
396 midas-p3_com_operating_instructions_gb_00198757_eng.xml
Draft 2016/01/18