User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
4. Close the front cover with both hands carefully.
DPP062
• Be sure the Tray 1 is inserted before you open the front cover.
• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the error is cleared.
Paper Misfeed Message (B)
• The inside of this printer becomes very hot. Before removing paper around the fusing unit, wait until
the temperature of the covers inside the fusing unit and paper transfer unit cools down.
1. Pull the front cover open lever, and then open the front cover with both hands carefully.
1
2
DPP058
Removing Jammed Paper
midas-p3_com_operating_instructions_gb_00198770_eng.xml 423
Draft 2016/01/18