User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
DPP072
After that, wipe it with a dry cloth to remove the water.
6. Push the metal plate down until it clicks into place to lock.
DPP043
7. Load the removed paper stack in the tray.
8. Lift the front side of the tray, and then slide it into the printer carefully until it stops.
DPP047
Do not slide the paper tray in forcefully. Otherwise, the front and side guides might move.
9. Firmly insert the plug of the power cord into the wall socket. Connect all the interface
cables that were removed.
10. Turn the main power switch on.
7. Maintenance and Specifications
434 midas-p3_com_operating_instructions_gb_00198785_eng.xml
Draft 2016/01/18