User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Cleaning the Registration Roller
When you use paper other than the standard types, specks of paper may stick on the registration roller,
causing problems. Clean the registration roller if white dots appear on prints.
Clean the registration roller if printed paper becomes smeared after a paper jam is cleared.
• The inside of the machine could be very hot. Do not touch the parts with a label indicating the
"hot surface". Otherwise, an injury might occur.
• Do not use chemical cleaners or organic solvents such as thinners or benzine.
1. Turn off the printer and unplug the power cord.
2. Pull out the plug from the socket. Remove all the cables from the printer.
3. Pull the front cover open lever, and then open the front cover with both hands carefully.
1
2
DPP058
The registration roller is set in the position shown by the illustration.
DPP073
Do not touch the registration roller.
Cleaning the Printer
midas-p3_com_operating_instructions_gb_00198785_eng.xml 435
Draft 2016/01/18