User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
DPP074
4. Using a cloth, wipe the rubber registration roller.
DPP075
5. Close the front cover with both hands carefully.
DPP061
6. Firmly insert the plug of the power cord into the wall socket. Connect all the interface
cables that were removed.
7. Turn on the main power switch.
Cleaning the Toner Density Sensor
1. Turn off the printer and unplug the power cord.
7. Maintenance and Specifications
436 midas-p3_com_operating_instructions_gb_00198785_eng.xml
Draft 2016/01/18