User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
B&W Print Priority
You can specify whether or not to reduce the consumption of color toner. When this function is
enabled, it may take longer to start printing a color page.
Default: [Off]
• On
• Off
Anti-Humidity
Select whether or not to reduce paper curl and print smearing when printing in a high-humidity
environment.
Anti-Humidity Setting
Default: [Off]
• On
• Off
Anti-Humidity Level
Default: [Level 1 (Weak)]
• Level 1 (Weak)
• Level 2 (Medium)
• Level 3 (Strong)
Print Compressed Data
You can specify whether or not to print compressed data. The supported compression format is
GZIP.
Default: [Off]
• On
• Off
Memory Usage
You can specify whether or not to use memory from Font Priority or Frame Priority.
Default: [Frame Priority]
• Font Priority
Allocates more memory to the PDL work area. Select this setting if printing fails due to
insufficient memory.
• Frame Priority
Allocates more memory for image processing. Select this setting to increase print speed.
Depending on the document you are printing, this setting might not be effective.
5. Configuring and Managing the Printer
242 midas-p3_com_operating_instructions_gb_00208890_eng.xml
Draft 2016/01/18