User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
10. Enter to change the registered value (mm) Press [OK]
Increase the value to move the print area in the direction indicated by the "+" symbol in the
diagram below. Decrease the value to move the print area in the direction indicated by the "-"
symbol.
CQT692
: Print Area
: Paper Feed Direction
11. Print the test sheet to check the adjustment result.
1. Press the [User Tools] key, and then print the test sheet.
[Maintenance: Image] [Adjust Print Position] [Print Test Sheet] Select the tray you want to
adjust
7. Maintenance and Specifications
446 midas-p3_com_operating_instructions_gb_00198796_eng.xml
Draft 2016/01/18