User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
2. Print the test sheet to preview the settings.
Use this sheet to check the current print position.
3. Press [Exit].
4. Adjust the printing position.
[Adjust Position] Select the tray you want to adjust Enter to change the registered value
(mm) [OK] [Exit]
Increase the value to move the print area in the direction indicated by the "+" symbol in the
diagram below. Decrease the value to move the print area in the direction indicated by the "-"
symbol.
Adjusting Printing Position
midas-p3_com_operating_instructions_gb_00198796_eng.xml 447
Draft 2016/01/18