User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
• The fusing unit becomes very hot. When installing a new fusing unit, turn off the printer and wait
at least an hour after power off before replacing parts. Not allowing the printer to cool may
result in burns.
• Replace the intermediate transfer unit and transfer roller together.
• When installing the waste toner bottle and the intermediate transfer unit, do not tilt, turn upside
down, or shake it.
Waste toner bottle
Replace the waste toner bottle when the following message appears on the display:
• SP C340DN
"Waste Toner Bottle full"
• SP C342DN
"Waste Toner Bottle is full. Replace the bottle."
When the following message appears on the display, the waste toner bottle should be replaced
soon.
• SP C340DN
"Waste Toner almost full"
• SP C342DN
"Waste Toner Bottle is almost full. A new Waste Toner Bottle is required. Please contact your
local vendor."
Intermediate transfer unit
Replace the intermediate transfer unit when the following message appears on the display:
• SP C340DN
"Replacemnt Requird: IntTrans"
• SP C342DN
"Replacement of Transfer Unit is now necessary. Please call service."
When the following message appears on the display, the intermediate transfer unit should be
replaced soon.
• SP C340DN
"Replcmnt Rqrd Soon: IntTrans"
• SP C3432DN
"Replacement of Transfer Unit will soon be necessary. A new unit is required. Please contact
your local vendor."
7. Maintenance and Specifications
452 midas-p3_com_operating_instructions_gb_00198797_eng.xml
Draft 2016/01/18