User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Paper input capacity:
Tray Paper capacity
*1
Standard paper feed tray 500 sheets
Bypass tray 100 sheets
500-sheet paper feed unit 500 sheets
*1
Paper
weight: 80 g/m
2
(20 lb. BOND)
Power requirements:
•
engb
(mainly Europe and Asia)
engb
220–240 V, 50/60 Hz, 6 A
•
engb
(mainly North America)
engb
120 V, 60 Hz, 11 A
ch,kr,tw
220-240 V, 50/60 Hz, 6 A
Power consumption (complete system):
Maximum: 1,300 W
The complete system consists of the main unit and the three optional paper feed units.
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1
W or less
Power consumption (main unit only):
Ready: 60 W
During printing: 650 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1
W or less
Warm-up time (23 °C (73.4 °F), rated voltage):
20 seconds
23 seconds
7. Maintenance and Specifications
458 midas-p3_com_operating_instructions_gb_00198807_eng.xml
Draft 2016/01/18