User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Direct Connection Settings
You can specify whether or not to enable the control panel can be used as a DHCP server.
When the client on a network starts, the information such as an IP address that is required for
network connection is assigned automatically.
Default: [OFF]
Configure all the following items to enable this function:
• Device name
Press [RENAME DEVICE] on the top right of the screen, and then enter the name of the
device connected to the client.
• Connection Password
Enter the password for connecting to a network.
• Display IPv4 Address
• Connection Status
Wireless LAN Signal
You can check the signal strength when using wireless LAN.
Restore Defaults
You can reset the wireless LAN settings to their default.
USB Settings
You can configure the communication parameters for computer-to-printer connection via USB.
USB Speed
Default: [Auto Select]
• Auto Select
• Full Speed
Fixed USB Port
Default: [Off]
• Level 1
• Level 2
• Off
• For details about how to configure the settings using Web Image Monitor, see Web Image Monitor
Help.
5. Configuring and Managing the Printer
262 midas-p3_com_operating_instructions_gb_00208890_eng.xml
Draft 2016/01/18