User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
• Complete system
Stand-by 40.0 dB (A)
Printing 69.5 dB (A)
• Sound pressure level:
• Main unit only
Stand-by 28.0 dB (A)
Printing
Full color:
50.0 dB (A)
B&W:
57.2 dB (A)
• Complete system
Stand-by 28.0 dB (A)
Printing 53.0 dB (A)
• Sound power levels and sound pressure levels are actual values measured in
accordance with ISO 7779.
• Sound pressure levels are measured from the position of the bystander.
• The complete system consists of the main unit and the three optional paper feed
units.
Memory:
Standard 512 MB, up to 2 GB (with the standard SDRAM module)
Hard disk:
320 GB (Optional)
Interfaces:
Standard:
• Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
• USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
• USB Host
• SD card slot
Optional:
7. Maintenance and Specifications
460 midas-p3_com_operating_instructions_gb_00198807_eng.xml
Draft 2016/01/18