User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
• 5180–5240 MHz (36, 40, 44, and 48 channels)
Transmission mode:
• Ad hoc mode
• Infrastructure mode
• Web Image Monitor is supported.
• A transmission rate of 300 Mbps is a theoretical value of the wireless LAN specification.
• The maximum transmission rate in the ad-hoc mode is 54 Mbps for IEEE802.11a and 11 Mbps for
IEEE802.11b/g. The Ad-hoc communication is not supported in an IEEE802.11n environment.
• The channel in use might differ depending on the country.
Specifications for IEEE1284 Interface Board
• Do not use an IEEE 1284 cable that is longer than 3 meters.
Transmission spec.:
IEEE 1284
Required cable:
Standard IEEE 1284 compliant Micro Centronics 36 pin cable
Specifications for USB Device Server
Interfaces:
• Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
• USB 2.0 (For connecting the printer and the print server interface)
Operating Systems:
• Windows Vista/7/8/8.1/10, Windows Server 2003/2008/2008 R2/2012
• Mac OS X 10.3 to 10.8
Protocols:
• The USB device server supports Port 9100, IPP, and LPR only. IPP does not support SSL.
• The USB device server allows simultaneous connection of up to 8 sessions of printing
protocols.
Specifications
midas-p3_com_operating_instructions_gb_00198807_eng.xml 463
Draft 2016/01/18