User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
The ENERGY STAR
®
Program Requirements for Imaging Equipment encourage energy conservation
by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multifunction
devices. Energy Star standards and logos are internationally uniform.
Sleep mode
If this machine remains idle for a specified period, it enters Sleep mode to reduce its electrical
consumption.
The default delay time the machine waits before entering Sleep mode is 1 minute. This default time
can be changed.
The machine can print jobs from computers while in Sleep mode.
Specification
Reduced electrical consumption in Sleep mode Less than 1.0 W
Time of switch into Sleep mode 1 minute
Time of switch out from Sleep mode (mainly Europe and Asia)
7.2 seconds
(mainly North America)
7.9 seconds
7.2 seconds
Information for This Printer
midas-p3_com_operating_instructions_gb_00198816_eng.xml 467
Draft 2016/01/18