User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Selection Signal Status High (default), Low
Input Prime Active, Inactive (default)
Bidirectional Communication On (default), Off
Signal Control Job Acceptance Priority (default), Printer Priority
• This menu appears only when the optional IEEE 1284 interface board is installed.
Wireless LAN
Communication Mode 802.11 Ad-hoc Mode, Infrastructure Mode (default)
SSID Setting
Ad-hoc Channel 11 (default), 36, 40, 44, 48
Security Method Off (default)
WEP WEP (Encryption) Key
WPA2 WPA2 Authent. Method
• WPA2, WPA2-PSK
Wireless LAN Easy Setup Push Button (default), Enrollee
Wireless LAN Signal
Restore Factory Defaults
• This menu appears only when the optional wireless LAN interface board is installed.
Print List
Print List
Email Settings (SP C342DN)
SMTP Server Server Name
Use Secure Connection (SSL) On, Off (default)
Port No. 1-65535
5. Configuring and Managing the Printer
270 midas-p3_com_operating_instructions_gb_00208892_eng.xml
Draft 2016/01/18