User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Function Details of the Printer Configuration
Items (SP C342DN)
This section describes the information about the setting items in each menu.
System Settings
This section describes user tools under System Settings menu.
General Features
Program/Change/Delete User Text
You can register text phrases you often use when specifying settings, such as ".com" and "Regards".
You can register up to 40 entries.
Panel Key Sound
You can specify whether or not the beeper (key tone) sounds when a key is pressed.
Default: [Medium]
Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on, or
when System Reset mode is turned on.
Default: [Home]
Screen Color Setting
You can change the screen color.
Default: [Blue-gray]
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is
pressed continuously.
Default: [Normal]
Measurement Unit
You can switch the measurement between [mm] and [inch] when you specify a custom size on the
control panel.
Default:
(mainly Europe and Asia)
[mm]
(mainly North America)
5. Configuring and Managing the Printer
286 midas-p3_com_operating_instructions_gb_00208911_eng.xml
Draft 2016/01/18