User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
[inch]
Check Status/Job List Display Time
You can specify how long to display the System Status and Job List display for.
When the setting is [On], you can specify a display time between 10 and 999 seconds in 1 second
increments using the number keys.
Default: [On], "15" second(s)
External Keyboard
You can specify the layout of the external keyboard connected to the USB port.
Default: [Off]
Compatible ID
You can enable or disable the Compatible ID setting.
Default: [Active]
Tray Paper Settings
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a
misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Printer
You can specify the tray to supply paper for output.
Default: [Tray 1]
Tray Paper Size: Trays 1–2
You can specify the size of the paper loaded in the paper Trays 1–2. To specify a custom paper
size, press [Custom Size] and enter the horizontal and vertical dimensions of the paper.
The paper sizes to be set using the control panel.
For details about available paper sizes, see page 106 "Paper Size Specifications".
Only the installed trays appear on the screen.
Printer Bypass Paper Size
You can specify the size of the paper loaded in the bypass tray. For details about available paper
sizes, see page 106 "Paper Size Specifications".
Default: [8
1
/
2
× 11 ]
Paper Type: Bypass Tray
You can specify the type of the paper loaded in the bypass tray. For details about available paper
types, see page 108 "Paper Type Specifications".
• Paper Type
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 287
Draft 2016/01/18