User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Default: [Plain Paper]
• Paper Thickness
Default: [Plain Paper 66-90g/m
2
]
• Apply 2 sided
Default: [Yes]
• Apply Auto Paper Select
Default: [No]
Paper Type: Trays 1–2
You can specify the type of the paper loaded in the paper Trays 1–2. For details about available
paper types, see page 108 "Paper Type Specifications".
Only the installed trays appear on the screen.
• Paper Type
Default: [Plain Paper]
• Paper Thickness
Default: [Plain Paper]
• Apply 2 sided
Default: [Yes]
• Apply Auto Paper Select
Default: [No]
• In [Plain Paper Setting] in [Maintenance: Print], you can specify the thickness of the plain paper you
load. For details, see page 327 "Maintenance: Print".
Timer Settings
Sleep Mode Timer
After a specified period has passed, or the [Energy Saver] key is pressed, the printer enters Sleep
Mode in order to conserve energy.
Specify the time to elapse before Sleep Mode.
The time can be set from 1 to 60 minutes, using the number keys.
Default:"1" minute(s)
Depending on which Embedded Software Architecture application is installed on it, the printer
might take longer than indicated to enter Sleep Mode.
Printer Auto Reset Timer
You can specify the time to elapse before the printer function is reset.
5. Configuring and Managing the Printer
288 midas-p3_com_operating_instructions_gb_00208911_eng.xml
Draft 2016/01/18