User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], "60" second(s)
Set Date
You can specify the date for the printer's internal clock using the number keys.
To change between year, month, and day, press [ ] and [ ].
Set Time
You can specify the time for the printer's internal clock using the number keys.
To change between hours, minutes and seconds, press [ ] and [ ].
(mainly Europe and Asia)
Enter the time using the 24-hour format (in 1 second increments).
(mainly North America)
Enter the time using the 12-hour format (in 1 second increments).
Auto Logout Timer
You can specify whether or not to automatically log out a user when the user does not operate the
printer for a specified period of time after logging in.
The time can be set from 60 to 999 seconds in one second increments, using the number keys.
Default: [On], "180" second(s)
Fusing Unit Off Mode (Energy Saving) On/Off
You can specify whether or not to use Fusing Unit Off mode.
Default: [Off]
• On
Turns on Fusing Unit Off mode. This setting further reduces power consumption, but the printer
may take longer to recover from Fusing Unit Off mode.
When you select [On], you can set [Exit Fusing Unit Off Mode] and [Fusing Unit Off Mode
Timer].
• Off
Turns off Fusing Unit Off mode.
Exit Fusing Unit Off Mode
You can specify the condition for the printer to exit Fusing Unit Off mode.
Default: [On Printing]
• On Printing
The printer exits Fusing Unit Off mode when printing is performed.
• On Operating Control Panel
The printer exits Fusing Unit Off mode when any key on the control panel is pressed.
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 289
Draft 2016/01/18