User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Blank Page Print
You can specify whether or not to print blank pages.
Default: [On]
• On
• Off
Letterhead Setting
You can specify whether or not to print on paper that has a fixed print side or print direction
(letterhead paper, for example). For details, see page 121 "Loading Orientation-Fixed Paper or
Two-Sided Paper".
Default: [Auto Detect]
• Off
The letterhead printing mode is disabled.
• Auto Detect
You can specify whether or not to print using letterhead mode whenever a page that has a
fixed print side or print direction is specified as the first page.
• On (Always)
Print with the letterhead printing mode regularly.
Tray Setting Priority
You can specify whether or not the paper size and type settings that are applied are those
specified using the control panel, printer driver, or print command.
Bypass Tray
You can specify whether or not the paper size and type settings applied for the bypass tray
are those specified using the control panel, printer driver, or print command.
Default: [Driver/Command]
• Driver/Command
When the source paper tray is specified for a print job, the paper settings specified using
the printer driver or by print command are applied, regardless of any settings specified
using the control panel.
• Machine Setting(s)
The paper settings specified on the printer's control panel are applied to all print jobs. An
error may occur if the paper settings specified using the printer driver or by print
command do not match those specified using the control panel.
• Machine Settg(s): Any Type
Printing is performed according to the paper size specified using the printer driver or
print command and the paper type specified on the machine. Regardless of the type of
Function Details of the Printer Configuration Items (SP C340DN)
midas-p3_com_operating_instructions_gb_00208890_eng.xml 245
Draft 2016/01/18