User's Manual

Default: [Active]
• @Remote Service
Default: [Active]
• Firmware Update (IPv4)
Default: [Active]
• Firmware Update (IPv6)
Default: [Active]
SMB Computer Name
You can specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Only use uppercase letters for alphabets.
SMB Work Group
You can specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Only use uppercase letters for alphabet.
Ethernet Speed
You can specify the network speed that the printer will use for Ethernet communication. If a
communication error occurs because of compatibility problems with the hub, select a speed
suitable for your network environment.
To reduce power consumption of network devices, the default Ethernet speed of the printer
does not exceed 100BASE-TX (100 Mbps). To communicate using a higher speed, select
[Auto Select: Enable 1Gbps] to enable 1000BASE-T (1Gbps) communication.
Default: [AutoSelct:Disable 1Gbps]
• AutoSelct:Enable 1Gbps
• AutoSelct:Disable 1Gbps
• 10Mbps Half Duplex
• 10Mbps Full Duplex
• 100Mbps Half Duplex
• 100Mbps Full Duplex
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 293
Draft 2016/01/18