User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
It is not necessary to install a new driver when the printer driver of this printer has already
been installed on the PC.
• Level 2
For details about this function, consult your administrator.
Program/Change/Delete Realm
You can program the realm to be used for Kerberos authentication. Be sure to set both the realm
name and KDC server name when programming a realm. For details about Program/Change/
Delete Realm, see page 368 "Configuring the Realm".
Program/Change
You can program a realm or change a programmed realm.
• Realm Name
• KDC Server Name
• Domain Name
Delete
You can delete a programmed realm.
Machine Data Encryption Settings
For details about this function, see Security Guide.
Program/Delete Device Certificate
You can program and delete a self-generated device certificate and also check status of the
certificate.
For details about this function, see Security Guide.
Device Setting Information: Import Setting (Server)
For details about this function, see Security Guide.
Device Setting Information: Run Import (Server)
For details about this function, see Security Guide.
Device Setting Information: Export (Memry Strge Devc)
For details about this function, see Security Guide.
Device Setting Information: Import (Memry Strge Devc)
For details about this function, see Security Guide.
Energy Server Key to Change Mode
xxxxx
Compulsory Security Stamp:Printer
You can specify whether or not to print security stamps on output documents using the printer
function. You can adjust where the stamps are printed. Available stamp settings : [Date/Time],
[Printout User Name], [Machine ID], [Machine IP Address], [Adjust Stamp Position]
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 309
Draft 2016/01/18