User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Default: [Off]
User's Own Customization
You can specify whether or not to allow logged-in users to display their own home screen. For
details about this function, see Security Guide.
Default: [Prohibit]
Display Supply Info
You can specify whether or not the amount of toner is displayed on the initial screen.
• Home Screen
Default: [On]
• Printer Application Screen
Default: [On]
ECO Night Sensor
The ECO Night Sensor (ambient light sensor) enables the printer to automatically turn off and on
the main power when changes in the ambient light level are detected.
You can specify how the printer performs when the ECO Night Sensor detects changes in the
ambient light level.
When Weekly Timer is set to [Daily] or [Day of the Week], the printer does not turn on even if
[ECO Night Sensor] is set to [Power Off and On] and the time for turning on the main power
specified in [Timer to Turn On] elapses.
Default: [Power Off Only]
• Power Off Only
The printer turns off the main power when the ECO Night Sensor detects a low ambient light
level.
• Power Off and On
The printer turns off the main power when a decrease in the ambient light level is detected. It
turns on the main power when an increase in the ambient light level is detected.
• Inactive
The ECO Night Sensor is disabled.
Timer to Turn Off
You can specify how long the printer waits to turn off the main power when the ECO Night
Sensor detects a low ambient light level.
The timer is reset when:
• The sensor detects changes in the ambient light level.
• Any key on the control panel is pressed or printing is performed.
• The main power switch is turned on.
5. Configuring and Managing the Printer
310 midas-p3_com_operating_instructions_gb_00208911_eng.xml
Draft 2016/01/18