User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
• The printer configuration screen is displayed on the control panel.
• The printer settings are changed using Web Image Monitor.
• The printer settings are imported or exported.
• A program is downloaded.
• The printer resumes Fusing Unit Off mode.
• The printer enters Sleep mode.
Default: [120 minutes]
• 1 minute
• 5 minutes
• 30 minutes
• 60 minutes
• 120 minutes
Timer to Turn On
You can specify how long the printer waits before it turns on the main power when the ECO
Night Sensor detects an increase in the ambient light level.
The timer is reset when:
• The sensor detects changes in the ambient light level.
• The ECO Night Sensor setting is changed.
• The main power is turned on.
• The printer enters Sleep mode.
Default: [1 minute]
• 1 minute
• 5 minutes
• 30 minutes
• 60 minutes
• 120 minutes
Brightness Sensor Level
Brightness Sensor Level to Turn Off
You can set the brightness threshold for the sensor to turn off the main power.
Default: 0
• 0 (Dark) - 15 (Bright)
Level 0 (Very dark): Equivalent to a moonlit night
Level 5 (Dark): Equivalent to a dimly-lit room
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 311
Draft 2016/01/18