User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Default: [128 KB]
I/O Timeout
You can set how many seconds the printer should wait before ending a print job. If data from
another port usually arrives in the middle of a print job, you should increase this timeout period.
Default: [15 seconds]
PCL Menu
Orientation
You can set the page orientation.
Default: [Portrait]
Form Lines
You can set the number of lines per page.
The number of lines can be specified from 5 to 128 by increments of one.
Default:
• (mainly Europe and Asia)
"64" lines
• (mainly North America)
"60" lines
Font Source
You can set the storage location of the default font.
Default: [Resident]
[RAM], [HDD], [SD], and [SD Font Download] can be selected only when fonts have been
downloaded to the printer.
Font Number
You can set the ID of the default font you want to use.
• When [Resident] is selected under [Font Source]:
The font number can be specified from 0 to 63 by increments of one.
Default: "0"
• When [RAM], [HDD], [SD], or [SD Font Download] is selected under [Font Source]:
The font number can be specified from 1 up to number of fonts stored on the printer.
Default: "1"
Point Size
You can set the point size you want to use for the selected font.
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 321
Draft 2016/01/18