User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
The number of point sizes can be specified from 4.00 to 999.75 by increments of 0.25.
This setting is effective only with variable-space fonts.
Default: "12.00" points
Font Pitch
You can set the number of characters per inch for the selected font.
The number of characters per inch can be specified from 0.44 to 99.99 by increments of 0.01.
This setting is effective only with fixed-space fonts.
Default: "10.00" pitches
Symbol Set
You can specify the character set of the selected font. The available settings are as follows:
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, ISO L6, ISO L9, PC-775, PC-8, PC-8 D/N,
PC-850, PC-852, PC-858, PC8-TK, PC-1004, Win L1, Win L2, Win L5, Win Baltic, Desktop, PS
Text, MS Publ, Math-8, PS Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21,
ISO 60, ISO 69, Win 3.0, MC Text, UCS-2, PC-864, Arabic-8, Win Arabic, PC-866, PC-866U,
ISO Cyrillic, Win Cyrillic, PC-851, Greek-8, ISO Greek, PC-8 Greek, Win Greek, PC-862,
Hebrew-7, Hebrew-8, ISO Hebrew
Default: [PC-8]
Courier Font
You can specify a courier font type.
Default: [Regular]
Extend A4 Width
You can extend the printing area width (when printing on A4 sheet with PCL).
Default: [Off]
When the setting is [On], the width will be 8
1
/
2
inches.
Append CR to LF
When set to [On], a carriage return will follow each line feed: CR=CR, LF=CR-LF, FF=CR-FF.
Default: [Off]
Resolution
You can set the print resolution in dots per inch.
Default: [600 dpi (Fast)]
5. Configuring and Managing the Printer
322 midas-p3_com_operating_instructions_gb_00208911_eng.xml
Draft 2016/01/18