User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Black & White Print Priority
You can specify whether or not to reduce consumption of color toner. When this function is
enabled, it may take longer to start printing a color page.
Default: [Off]
• On
• Off
B & W Low Speed Printing (Thick Paper)
You can specify whether or not to lower the print speed of black-and-white pages on thick paper if
lateral streaks appear on the output. Enabling this setting prevents streaks from appearing on the
output by lowering the print speed.
If this function is enabled, the lifetime of the toner and drum unit becomes shorter than their normal
lifetime.
Default: [Inactive]
• Active
• Inactive
Maintenance: Image
Color Regist.
You can perform automatic adjustment of color registration. For details, see page 440 "Adjusting
the Color Registration".
Color Calibrt.
You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for
printing. For details, see page 441 "Correcting the Color Gradation".
• Adjust Auto Density
You can print the gradation of auto density.
• Print Test Pattern 1
You can print gradation correction sheet 1.
• Print Test Pattern 2
You can print gradation correction sheet 2.
• Reset Setting
You can reset the gradation correction value to default.
Adjust Print Position
You can adjust the starting position of the printing page. For details, see page 445 "Adjusting
Printing Position".
Function Details of the Printer Configuration Items (SP C342DN)
midas-p3_com_operating_instructions_gb_00208911_eng.xml 329
Draft 2016/01/18