User's Manual
Table Of Contents
- 6. Troubleshooting
- 7. Maintenance and Specifications
- General Requirements
- Moving the Printer
- Cleaning the Printer
- Adjusting the Color Registration
- Correcting the Color Gradation
- Adjusting Printing Position
- Replenishing and Replacing Consumables
- Consumables
- Specifications
- Information for This Printer
- User Information on Electrical & Electronic Equipment
- EMC Directive
- Note for the Battery and/or Accumulator Symbol (For EU countries only)
- Environmental Advice for Users
- Notes for users in the state of California
- ENERGY STAR Program
- Environmental protection expiration date for use
- Fixed form sentences 11 _ china environmental labeling notice _ LP_Title Sentence 1
- Appendix
Print Test Sheet
You can print the registration test sheet.
Only the installed trays appear on the display panel.
• Paper Trays 1–2
• Bypass Tray
• Duplex Unit
Adjust Position
You can specify the start position for printing on a page.
Only the installed trays appear on the display panel.
• Horizontal: Trays 1-2
• Horizontal: Bypass Tray
• Horizontal: Back Side
• Vertical: Trays 1–2
• Vertical: Bypass Tray
• Vertical: Back Side
4 Color Graphic Mode
You can adjust levels of toner color overlap. If characters or lines blur, setting priority on text may
make them clearer. Under normal conditions, set priority on photos.
Default: [Photo Priority]
• Text Priority
• Photo Priority
5. Configuring and Managing the Printer
330 midas-p3_com_operating_instructions_gb_00208911_eng.xml
Draft 2016/01/18