User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. Getting Started
- Before You Start
- Manuals for This Machine
- Guide to Names and Functions of Components
- Using the Screen on the Control Panel
- Logging in to the Printer
- User Code Authentication Using the Control Panel
- User Code Authentication Using a Printer Driver
- Logging In Using the Control Panel
- Logging Out Using the Control Panel
- Logging In Using a Printer Driver
- Logging In Using Web Image Monitor
- Logging Out Using Web Image Monitor
- User Lockout Function
- Changing the Login Password
- Downloading Utility Software
- 2. Setting Up the Printer
- Printer Set Up Procedure
- Install Location
- Checking the Contents of the Box
- Unpacking
- Installing Options
- Connecting the Power Cord
- Turning On/Off the Power
- Selecting the Display Language
- Connecting the Printer
- Configuration
- Test Printing
- 3. Loading Paper
2. Slide both sides of the paper guide outward, and then load paper print side up until it
stops.
3. Slide both sides of the paper guide outward, and then load paper print side down until it
stops.
1
1
2
DPP055
4. Adjust both sides of the paper guide to match the paper width.
DPP056
• When using the bypass tray, it is recommended that you set the paper direction to .
• Before loading Postcard or 148 × 200 mm paper, straighten any curls within 2 mm (0.1 inch)
upward and 0 mm (0 inches) downward on the tray.
• Letterhead paper must be loaded in a specific orientation. For details, see page 121 "Loading
Orientation-Fixed Paper or Two-Sided Paper".
• You can load envelopes into the bypass tray. Envelopes must be loaded in a specific orientation.
For details, see page 123 "Loading Envelopes".
3. Loading Paper
120 midas-p3_com_operating_instructions_gb_00198518_eng.xml
Draft 2016/01/18