User's Manual

5. Remaining paper indicator
Indicates the approximate amount of paper remaining in the tray.
6. Standard paper feed tray (Tray 1)
Up to 500 sheets of plain paper can be loaded.
For details about the sizes and types of paper that can be used, see page 106 "Paper Size Specifications"
and page 108 "Paper Type Specifications".
7. Bypass tray
Up to 100 sheets of plain paper can be loaded.
For details about the sizes and types of paper that can be used, see page 106 "Paper Size Specifications"
and page 108 "Paper Type Specifications".
8. Main power switch
Use this switch to turn the power on and off.
Perform the shutdown procedure before turning the power off. For details about how to shut down the printer,
see page 73 "Turning Off the Power".
9. Ventilation holes
Prevent overheating.
10. Top cover
Open this cover to replace the print cartridge
11. Stop Fence (Legal-size prints)
Raise the rear fence to prevent Legal-size prints from falling behind the printer.
After using the stop fence, be sure to return it to its original position. The fence may be damaged if it is hit with
something or excessive force is applied.
12. Stop Fence (A4/Letter-size prints)
Raise the front fence to prevent A4 or letter-size prints from falling behind the printer.
After using the stop fence, be sure to return it to its original position. The fence may be damaged if it is hit with
something or excessive force is applied.
13. Standard Tray Extension
Use this to support sheets that come out curled after they are printed.
Flip open the extension by pushing down on the end that is toward the rear of the printer.
Guide to Names and Functions of Components
midas-p3_com_operating_instructions_gb_00198424_eng.xml 15
Draft 2016/01/18