User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. Getting Started
- Before You Start
- Manuals for This Machine
- Guide to Names and Functions of Components
- Using the Screen on the Control Panel
- Logging in to the Printer
- User Code Authentication Using the Control Panel
- User Code Authentication Using a Printer Driver
- Logging In Using the Control Panel
- Logging Out Using the Control Panel
- Logging In Using a Printer Driver
- Logging In Using Web Image Monitor
- Logging Out Using Web Image Monitor
- User Lockout Function
- Changing the Login Password
- Downloading Utility Software
- 2. Setting Up the Printer
- Printer Set Up Procedure
- Install Location
- Checking the Contents of the Box
- Unpacking
- Installing Options
- Connecting the Power Cord
- Turning On/Off the Power
- Selecting the Display Language
- Connecting the Printer
- Configuration
- Test Printing
- 3. Loading Paper
Installing Options
By installing options, you can improve printer performance and expand the available features.
Order of Option Installation
When installing multiple options, the following order is recommended:
1. Attach the paper feed unit.
Attach the paper feed unit to the bottom of the printer.
2. Install the hard disk.
3. Install the optional interface board.
Install in the slot of the printer.
Only one interface board can be installed.
4. Insert SD card options.
Insert in the SD card slot of the printer.
There are two slots for SD cards.
Each slot supports different types of SD cards.
If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or
service representative.
Attaching the Paper Feed Unit
You can install a 500-sheet paper feed unit.
• The printer weighs approximately 29/30 kg (63.9/66.1 lb.). When moving the printer, hold
the handles located on both sides, and then lift it slowly. Lifting it carelessly or dropping it may
cause an injury.
• Do not place the printer directly on the floor.
• When attaching multiple options, attach the paper feed unit first.
1. Turn the printer off and unplug the power cord.
2. Remove the packaging from the paper feed unit.
Installing Options
midas-p3_com_operating_instructions_gb_00198474_eng.xml 57
Draft 2016/01/18