User's Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. Getting Started
- Before You Start
- Manuals for This Machine
- Guide to Names and Functions of Components
- Using the Screen on the Control Panel
- Logging in to the Printer
- User Code Authentication Using the Control Panel
- User Code Authentication Using a Printer Driver
- Logging In Using the Control Panel
- Logging Out Using the Control Panel
- Logging In Using a Printer Driver
- Logging In Using Web Image Monitor
- Logging Out Using Web Image Monitor
- User Lockout Function
- Changing the Login Password
- Downloading Utility Software
- 2. Setting Up the Printer
- Printer Set Up Procedure
- Install Location
- Checking the Contents of the Box
- Unpacking
- Installing Options
- Connecting the Power Cord
- Turning On/Off the Power
- Selecting the Display Language
- Connecting the Printer
- Configuration
- Test Printing
- 3. Loading Paper
9. Tighten the screw.
DFP023
10. Attach the memory cover.
DFP024
11. Plug in the power cord, and then turn on the printer.
12. Print the configuration page to confirm the installation.
• Check that the hard disk was correctly installed by printing the configuration page. If it is correctly
installed, "Hard Disk" will appear for "Device Connection" on the configuration page. For details
about printing the configuration page, see page 100 "Test Printing".
• If the hard disk was not installed properly, repeat the procedure from the beginning. If it cannot be
installed correctly even after trying the installation a second time, contact your sales or service
representative.
• To use the installed hard disk, configure the printer options in "Accessories" in the printer driver. For
information about opening "Accessories", see "Configuring Option Settings for the Printer", Driver
Installation Guide.
2. Setting Up the Printer
62 midas-p3_com_operating_instructions_gb_00198474_eng.xml
Draft 2016/01/18